Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Side Panels (B) and (C) to
Front Panel (D) and Back Panel (E)
with Cross Dowels and
Head Cap Bolts (long).
(See Figure 1)
B
C
D
E
Head Cap Bolt (long)
Cross Dowel
Figure 1
F
A
STEP 2
Attach Seat (A) to unit
with Head Cap Bolts.
(See Figure 2)
Put Base (F) into place.
Head Cap Bolt
Wood Plug
Figure 3
Spring Support
STEP 3
Attach Spring Supports to unit with
Wood Screws for Spring Support.
(See Figure 3)
Cover all holes with Wood Plugs.
(See Figure 4)
Figure 4
Figure 2
Wood Screw
for Spring Support
