Flat Washer
Spring Washer
Nut
Nut Cap
Nut Cap
Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Key Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Legs (B) to Side Frames (C) with
Flat Washers, Spring Washers and Nuts,
tightening the nuts only half way.
(See Figures 1 and 2)
Flat Washer
Spring Washer
Nut
Bolt
STEP 2
Place Top (A) upside down on a soft cloth.
Insert Bolts into the pre-drilled holes of Top (A).
(See Figure 3)
Attach unit to Top (A) with Flat Washers,
Spring Washers and Nuts, tightening
the nuts only half way.
Tighten all Nuts used in Steps 1
and 2, then cover all Nuts with Nut Caps.
Figure 1
Figure 2
B
B
B
B
C
C
C
C
Figure 3
