Homestyles 88 5412 182 Quick Start Manual Download Page 2

Page: 2 / 8

IMPORTANT

Use a soft cloth between these parts and the floor.

Do not use power tools above 8 volts to assemble.

Do not tighten all the bolts until each part is properly assembled.

The unit must be level to work properly. Use the included adjustable levelers to level.

Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.

Assembly Instructions 2/7

Cam Lock Screw

Figure 1

Cam Lock Screw

STEP 1

Insert Cam Lock Screws into the pre-drilled
holes of Side Panels (B), (C) and
Middle Panels (D), (E). (See Figure 1)

Figure 2

Spring Washer

Flat Washer

Head Cap Bolt

STEP 2

Attach Middle Panels (D) and (E) to

Back Panel (F) with Flat Washers,

Spring Washers and Head Cap Bolts.

(See Figure 2)

Summary of Contents for 88 5412 182

Page 3: ... Washers Spring Washers and Head Cap Bolts Head Cap Bolt Spring Washer Flat Washer J Cam Lock Head Cap Bolt Spring Washer Flat Washer H I G G STEP 4 Attach Bases I and J to unit with Flat Washers Spring Washers and Head Cap Bolts Attach Stretchers H to unit with Cam Locks See Figure 3 Attach Stretchers G to unit H ...

Page 5: ...ach Knob with Machine Screws K1 Drawer Front 2 pcs K2 Drawer Back 2 pcs K3 Drawer Side 2 pcs K4 Drawer Side 2 pcs K5 Drawer Bottom 2 pcs Figure 1 Figure 2 Roller at back Lock K2 K3 K4 STEP 2 Slide Drawer Bottom K5 into the grooves of Drawer Sides K3 and K4 until it meets Drawer Back K2 Attach Drawer Front K1 to unit then flip the locks K2 K3 K4 K5 K1 ...

Page 6: ...igure 2 L1 Drawer Front 2 pcs L2 Drawer Back 2 pcs L3 Drawer Side 2 pcs L4 Drawer Side 2 pcs K5 Drawer Bottom 2 pcs STEP 3 Attach Knob with Machine Screws STEP 2 Slide Drawer Bottom K5 into the grooves of Drawer Sides L3 and L4 until it meets Drawer Back L2 Attach Drawer Front L1 to unit then flip the locks Roller at back Lock L2 L4 L3 L2 L4 L3 K5 L1 ...