Cam Lock Screw
STEP 1
Remove the Drawer from Top (A).
STEP 2
Insert Cam Lock Screws into
the pre-drilled holes of Side Panels (C).
(See Figure 1)
STEP 3
Place Top (A)
upside down on a soft cloth.
Assemble Side Panels (C)
and Rail (B) with Cam Locks.
(See Figure 2)
Place unit onto Top (A).
Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
A
C
Figure 1
Figure 2
C
C
B
B
A
