Assembly Instructions 4/4
Wall Screw
M4x16
Machine Screw
2 pcs.(+1 extra)
Anchor
2 pcs.(+1 extra)
Bracket
4 pcs.(+1 extra)
Tipover Restraint
2 pcs.(+1 extra)
Hardware List
Drill 3/8” holes in wall
Top of unit
Attention!
To help reduce the risk of the unit tipping over, the Tipover Restraint
be installed following
must
these instructions exactly!
M3.5x40
Wall Screw
2 pcs.(+1 extra)
tie end
loop end
Place unit at desired location.
Drill two
holes in wall
3/8”
at the appropriate location.
Insert Anchors into the wall holes
and attach Brackets with Wall Screws.
Attach Brackets at pre-drilled holes at top
of unit with Machine Screws.
Use Tipover Restraints to secure Brackets
on unit to Brackets on wall.
(See Figure X)
Put tie end of Tipover Restraint into loop end
of Tipover Restraint and pull until tight.
Figure X
Bracket
on wall
Anchor in wall
3/8” wall hole
Bracket at
top of unit
Tipover
Restraint
Machine
Screw
