Assembly Instructions 2/3
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten all the Head Cap Bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* Please make sure unit is level before tightening these screws.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
D
E
E
D
F
F
STEP 1
Attach Stretchers (D) and (E) to
Side Frame (F) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening the bolts only half way.
(See Figure 1)
Attach Side Frame (F) to unit
with Flat Washers,
Spring Washers and
Head Cap Bolts, tightening the
bolts only half way.
Figure 1
Head Cap Bolt
Spring Washer
Flat Washer
STEP 2
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening the bolts only half way.
Tighten all Head Cap Bolts.
A
Head Cap Bolt
Spring Washer
Flat Washer
