Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Side Frames (D) to Side Frame (F)
with Flat Washer, Spring Washer and
Head Cap Bolt, tightening the bolt
only half way. (See Figure 1)
Attach Steel Plates to Back Stretcher (I)
with Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 2)
Attach Front Stretchers (H) and
Back Stretchers (I) to unit with
Flat Washers, Spring Washers and
Head Cap Bolts, tightening the
bolts only half way.
D
F
H
H
I
I
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Steel Plate
G
E
STEP 2
Attach Side Frame (E) to Side Frame (G)
with Flat Washer, Spring Washer and
Head Cap Bolt, tightening the bolt only half way.
Attach unit to unit from Step 1 with Flat Washers, Spring Washers
and Head Cap Bolts, tightening the bolts only half way.
Head Cap Bolt
Spring Washer
Flat Washer
Figure 1
Figure 2
