Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
Middle Unit
STEP 1
Attach Seat (P) to Back (O) with Head Cap Bolts,
Spring Washers and Flat Washers,
tightening bolts only halfway.
(See Figure 1)
STEP 2
Attach Frame (D) to unit with
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Flat Washer
Spring Washer
Head Cap Bolt
P
O
Flat Washer
Spring Washer
Head Cap Bolt
D
