Head Cap Bolt
Spring Washer
Flat Washer
Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 2
STEP 1
Place Top (A) upside down on a soft cloth.
Attach Legs (B) to Top (A) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 1)
Head Cap Bolt
Spring Washer
Flat Washer
STEP 2
Attach Stretcher (C) to unit with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 2)
Tighten all bolts used in Steps 1 and 2.
B
B
B
B
A
Figure 1
C
