E
D
Head Cap Bolt
Arrow labels point to each other.
G
B
I
Q
Head Cap Bolt
Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Back Stretcher (G) to
Side Panel (B) with Head Cap Bolt.
(See Figure 1)
Attach Divider (Q) to
Back Stretcher (G) with
Head Cap Bolt.
Attach Front Rail (I) to unit
with Head Cap Bolts.
Figure 1
STEP 2
Attach Back Upright (J1) to Middle Panel (D)
and Back Upright (J2) to Middle Panel (E),
then attach to unit with Head Cap Bolts.
Note: Assemble so Arrow labels
on Back Uprights (J1) and (J2)
point to each other.
J2
J1
