Assembly Instructions 5/9
STEP 7
Turn unit over to its’ upright position.
Attach Hinges to Doors (J) with Wood Screws for Hinge
into pre-drilled holes, then tighten. (See Figure 4)
Attach Doors (J) to unit with Wood Screws for Hinge into pre-drilled holes,
then tighten. (See Figure 5)
Insert Cam Lock Screws into pre-drilled holes in unit, then tighten.
Cam Lock Screw
Hinge
Wood Screw for Hinge
J
J
Figure 4
Figure 5
Figure 6
Figure 7
UP
Front
Back
Down
Figure 8
Left
Right
STEP 8
If needed, adjust doors up or down by removing the front Wood Screws for Hinge and
loosening slightly the back Wood Screws for Hinge from side panel, adjusting doors up or down
and reinstalling screws. (See Figure 6)
If needed, adjust doors left to right. (See Figure 7)
If needed, adjust doors front to back. (See Figure 8)