Assembly Instructions 2/3
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in the future.
Cap
Bolt
Flat Washer
Seat (A)
Cap
Connector (B)
Flat Washer
Spring Washer
Nut
Cap
STEP 1
Attach Seat (A) to Connector (B) with Bolts,
Flat Washers, Spring Washers and Nuts,
tightening bolts and nuts only halfway.
(See Figure 1)
Tighten all Bolts and Nuts.
Cover all Bolts and Nuts with Caps.
A
B
