STEP 4
Turn unit over to its upright position.
Attach Back (D) to unit with Head Cap Bolts, tightening bolts only halfway.
Attach Support (E) to Back (D) with Round Head Bolts, Flat Washers (small),
Spring Washers (small) and Nuts (small), tightening Round Head Bolts only halfway.
(See Figure 4)
Tighten all Head Cap Bolts and Round Head Bolts.
Nut (small)
Spring Washer (small)
Flat Washer (small)
Round Head Bolt
Round Head Bolt
Flat Washer (small)
Spring Washer (small)
Nut (small)
Head Cap Bolt
Figure 4
Assembly Instructions 5/5
D
E
