Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Frames (C) to Frame (B) with Flat Washers and
Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Figure 1
B
C
C
Head Cap Bolt
Flat Washer
Figure 2
A
STEP 2
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with Flat Washers (small)
and Wing Nuts, tightening Wing Nuts only halfway.
(See Figure 2)
Tighten all Head Cap Bolts used in Step 1.
Tighten all Wing Nuts.
Wing Nut
Flat Washer (small)
