Assembly Instructions 2/4
STEP 2
Attach Side Panels (B) and (C) to unit with Head Cap Bolts,
Spring Washers and Flat Washers, then flip Locks. (See Figure 3)
Attach Middle Panel (D), then flip Locks.
Attach Foot (F) to unit, then tighten.
STEP 1
Attach Back Panel (H) to Base (E),
then flip Locks. (See Figures 1 and 2)
Figure 1
Figure 2
H
E
Flat Washer
Lock
Spring Washer
Head Cap Bolt
Lock
F
B
C
Figure 3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
D
