Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A), Side Panels (B), (C) and Back Panel (D),
then tighten. (See Figure 1)
STEP 2
Place Base (E) upside down
on a soft cloth.
Attach Casters to unit with Wood Screws (short) into
pre-drilled holes, with Locking Casters at front. (See Figure 2)
Figure 1
Figure 2
A
B
C
D
Cam Lock Screw
E
Wood Screw (short)
Non-Locking Caster
Locking Caster