Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Make sure unit is level before tightening these screws.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in future.
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes of
Side Panels (C) and (D), then tighten. (See Figure 1)
C
Cam Lock Screw
D
STEP 2
Attach Middle Panels (E) and (F) to Back Panel (N).
Attach Frame (L) to unit.
E
F
L
N
