Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Legs (B) and (C) to Seat (A)
with Flat Washers, Spring Washers and
Head Cap Bolts, tightening bolts only
halfway. (See Figure 1)
Attach Front Stretcher (G) to unit with
Wood Screws. (See Figure 2)
Attach Side Stretcher (E) to Leg (B) and
Side Stretcher (F) to Leg (C) with Wood Screws.
Head Cap Bolt
Spring Washer
Flat Washer
Wood Screw
B
A
E
F
C
G
STEP 2
Attach Back Frame (D) to unit with Flat Washers,
Spring Washers, Head Cap Bolts (short),
Head Cap Bolts (long) and Wood Screws.
(See Figures 3 and 4)
Tighten all bolts used in Steps 1 and 2.
Head Cap Bolt (long)
Spring Washer
Flat Washer
Wood Screw
Head Cap Bolt (short)
Spring Washer
Flat Washer
D
Figure 3
Figure 4
Figure 1
Figure 2
