Assembly Instructions 2/9
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach Magnets to Front Rail (F) with 1/2” Round Head Screws into pre-drilled holes.
(See Figure 2)
Figure 2
1/2” Round Head Screw
Magnet
F
Cam Lock Screw
Figure 1
G
L
H
J
B
C
F
E
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Side Panels (B), (C),
Front Rails (E), (F), Back Rails (G), (H),
Base (J) and Back Upright (L), then tighten.
(See Figure 1)
