Assembly Instructions 2/6
Cam Lock Screw
Figure 2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Posts (K) and (L),
then tighten. (See Figure 1)
STEP 2
Attach Back Rail (C) to Post (K) with Cam Lock.
(See Figure 2)
Attach Back Upright (D) to Back Rail (C).
Slide Back Panels (N) into position.
Attach Back Rail (C) to unit with Cam Lock.
Attach Post (L) to unit with Cam Locks.
K
L
Figure 1
C
Cam Lock
K
L
C
D
C
N
N
