3
HomesteadImplements.com
®
•
A safety chain will help the
machine control the hitched
implement should it separate from
the tractor drawbar.
•
Always hitch the implement to the
machine towing it, do not use the
safety chain alone to tow the
implement.
• Use a chain with a strength rating
equal to or greater than the
complete gross weight of the
towed implement.
•
Attach the safety chain to the
tractor drawbar support or other
specified anchor location. Only
allow enough slack in the chain to
permit turning.
•
Always comply with federal, state, and local laws when towing equipment.
•
Be aware and avoid any contact with overhead utility lines or electrically charged
conductors.
•
Use towing vehicles and trailers of adequate size and capability only.
•
Secure all equipment on trailer with appropriate tie downs and chains.
•
Sudden and drastic braking can cause a towed trailer to swerve and upset. Reduce
speed when in transit if the attached trailer does not have independent brakes.
•
Always drive with the load on the end of leader arms low to the ground.
•
Always drive straight up and down steep inclines with the heavy end of a tractor or
implement with loader attachment on the “uphill” side.
•
Always engage parking brake when stopped on an incline.
• IMPORTANT:
Do not tow a load that is more than double the weight of the vehicle
towing the load.
USING A SAFETY CHAIN
ALWAYS TRANSPORT SAFELY
•
Understand procedures before doing any work. Refer to Operator’s Manual for additional information and to confirm that any
work done will not void the Homestead Implements Warranty.
•
Work on a level surface in a clean dry area that is well-lit.
•
Lower implement to the ground and follow the shutdown procedures before leaving the machine’s operator seat to
perform any maintenance.
•
Use properly grounded electrical outlets and tools and only use tools that are in good operating condition.
•
Allow equipment to cool completely before performing any work on it.
•
Do not work under any hydraulic supported equipment. Implement can settle, suddenly leak down, or be lowered
accidentally. If it is necessary to work underneath the equipment, securely support it with stands and suitable blocking
beforehand.
•
Disconnect battery ground cable (-) before servicing or adjusting electrical systems or before welding on the implement.
•
Replace parts on this implement with real Homestead Implements parts only. Do not alter this implement in a way which will
adversely affect its performance.
•
Remove buildup of grease, oil, or debris.
•
Do not grease or oil implement while it is in operation.
•
Inspect all parts and ensure that the parts are in good condition & installed properly.
•
Always be sure that any material and waste from the repair and maintenance of the implement are properly collected and
disposed of.
•
Remove all tools and unused parts before operating the implement.
•
Do not weld or torch on galvanized metal as it will release toxic and dangerous fumes.
SAFE MAINTENANCE PRACTICES
Safety Information
Summary of Contents for Independence HI-I-LPS-48
Page 1: ......
