Page 1
HomeSeer | 10 Commerce Park North, Ste 10 | Bedford, NH 03110 | HomeSeer.com | Doc: SmartStick
-
G3
-
insert
-
v1.0
Sma G3 Z
-
Wave
TM
Interface
OVERVIEW
Sma G3
is a USB Z
-
Wave
TM
interface that
’
s designed to send and receive
wireless Z
-
Wave commands to and from compatible smart home products in the home.
Sma is compatible with most smart home systems including HomeSeer HS3 &
HS4
-
powered software and hubs. Click the QR code to the right or visit
homeseer.com/zwave
-
interfaces
for more information on Sma G3.
INSTALLATION ON A HOMESEER SYSTEM
1.
Drivers:
Sma is a
virtual COM
device with a USB port connection. A software driver is
required to allow Sma to work. Windows 10 will automatically acquire the driver but if
you
’
re using Windows 7 or 8, the driver is available on
homeseer.com/downloads
(Sma
Driver). HomeSeer Linux
-
based hubs are already equipped with the appropriate drivers.
2.
Physical Installation:
Simply attach Sma to a USB port
on your HomeSeer system. If the driver is installed, a COM port
number will be assigned by the operating system. To confirm this,
open your
Windows Device Manager
and expand the
Ports
section. Your Sma will appear as a
USB Serial Device
. In
the example at the right, Windows has assigned COM port #4 to this Sma. Your COM port
may be different.
3.
Access the web interface of your HomeSeer system using the
find.homeseer.com
service.
4.
Install the latest version of the
HomeSeer Z
-
Wave plugin
(v3.0.3.3 or later).
5.
Navigate to the
Plugins > Z
-
Wave > Add Interface
(HS4) or
Plugins > Z
-
Wave > Controller
Management
, and click the
Add Interface
button (HS3).
6.
Name your Sma, select the Sma as the device type and then the correct COM
port.
7.
Finish going through the stepper process (HS4) or click the yellow and red
disabled
button to
enable
your new Sma (HS3).
INSTALLATION ON A NON
-
HOMESEER SYSTEM
Sma G3 is a static bridge controller that uses the Z
-
Wave serial API. Check the manual or
user guide for your system for details on how to add a Z
-
Wave USB interface to your system.
UPGRADING FROM ANOTHER INTERFACE
In some cases, HomeSeer system users may be able to upgrade from another interface to
Sma G3 using a backup and restore process. If possible, this would substantially reduce the
amount of time and effort needed to convert to Sma G3. Please visit the Sma G3
listing at
homeseer.com/zwave
-
interfaces
for more information about upgrading.
NEED HELP?
You can get help in several ways:
•
Visit
homeseer.com/zwave
-
interfaces
for the latest information on Sma G3
•
Visit
docs.homeseer.com
for all product documentation
•
Contact us:
homeseer.com/contact
-
us
