10
Pull out the top cover.
Connect the diverter valve to the
faucet. If needed, use one of the
three faucet adapters.**
Open the battery cover and insert
the batteries.
Insert the other end of the tube
to the elbow fitting at the back of
the unit until it is properly locked.
Put the top cover back on the filter
and connect the flexible pipe to
the nipple.
Place the filter near the sink and
open the cold water supply. Open
the valves and check all connections
for leakage.
Connect the plastic tube to the
diverter valve. Tighten the cap.*
Before using the filtered water as
drinking water, let the water flow
for at least 10 minutes.
* Push the plastic tube firmly and completely over the valve before locking it in with the ring.
** In case no adapter fits to your faucet, you will need to purchase an additional adapter that will fit your faucet style.
Always hold the unit from the bottom as the upper part is not secured to the unit and comes off easily for filter replacement.
user manual
installatiOn GuiDelines
