page 11
©
Suncast Corporation
Step 46: Align the end of one 72” board flush with the end of a 68-1/2” 2x4; attach using ten 3-1/4” nails
spaced evenly apart.
Step 47: Repeat step 46 to as-
semble a second door jack stud.
Step 49: Push the jack stud tight
against the door header.
Step 50: Attach the jack studs to the door header using four 3-1/4” nails per side.
Door Header Assembly
Step 43: Remove and organize
parts from box 3.
Step 44: Locate the door header
which is 59-1/2” long.
Step 45: Locate two 2x4’s 68-1/2”
long and two 72” long.
Step 48: Lay out the door opening
pieces including two jack studs
and the door header as shown.
