5
www.homewerksww.com
BLUETOOTH
®
PAIRING MODE (continued)
1. If the mirror does not locate your device automatically, press and hold the power button to restart until you hear “Beep, Beep” from
the mirror speaker, then check to see that “HW MIRROR” appears as a discoverable device on your device. This may take a few
minutes.
2. Select to connect your device to the mirror.
3. The blue light will stay on indicating that the pairing is successful.
4. You are now ready to use your music mirror!
NOTE:
Bluetooth
®
wireless devices have a maximum range of 30 feet (10 m). Actual range will vary depending on frequency requirements,
obstacles, interference, etc. For optimal quality of hands-free calls, it is advisable to maintain a maximum range of about 3 feet (1 m).
Remember...
1. Whenever you turn your music mirror on, it will automatically try to connect to the last device it was connected to.
2. If multiple devices have been successfully paired to the mirror, it will automatically connect to the last device connected.
HANDS-FREE CALLS
Press the “
” button to answer the phone. This will automatically pause the music.
Press the “
” button again to hang up the phone. The music will automatically begin to play again.
PLAYING MUSIC ON YOUR MIRROR SPEAKER
You can either play music on the built-in speaker from your Bluetooth
®
enabled device once paired, or use the USB port to play music
from your USB Flash Drive.
Press and hold “–” to turn volume down.
Press and hold “+” to turn volume up.
Press “–” to go to the previous song on your playlist.
Press “+” to go to the next song on your playlist.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Failure to establish
Bluetooth
®
connection
1. In your settings, ensure that Bluetooth® pairing is enabled on your mobile device.
2. The mirror might still be connected to another Bluetooth
®
device. Please ensure that all other devices
are disconnected before attempting to establish a connection with a new device. Once this is done,
pairing can be done as usual.
3. If connection still cannot be established, restart your phone or Bluetooth
®
device.
Bluetooth
®
connection
range seems shorter than
normal
1. There might be obstacles between the Bluetooth
®
device and mirror. Make sure all obstacles are
removed for a clear path.
There is auditable static
and / or the music from
your mobile device cuts out
1 There might be obstacles between your mobile device and the mirror. Remove
all obstacles for a clear path.
2. The mobile device is too far away from mirror. Shorten the distance for optimal performance
No sound is coming from
the mirror after Bluetooth
®
connection has been
established
1. The volume on the mobile device is turned down. Make sure that the volume is turned up.
2. The volume on the mirror is turned all the way down. Adjust the volume by using
the volume up button “+”
Unstable connection from
multiple mobile phones and
other Bluetooth
®
devices
1. Only one Bluetooth
®
connection can be established at one time. If you wish to connect another device to
the mirror, you must first disconnect the current paired device.
If the above solutions have not corrected the issue and the mirror is still not working properly, please call our customer service line at
1-877-319-3757 for technical support.
