60
Start-up
• After establishing the power supply, the teach-in
mode of the wall thermostat remains activated
for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(D)
briefly (
see figure 8)
.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED
(D)
lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• After a short time, the newly connected device
appears in the inbox of your software interface.
Newly connected devices and the corresponding chan-
nels are ready for operation and configuration only after
