HomeMatic HmIP-WRCR, Mounting Instruction And Operating Manual

Page: 38 / 54

38
Start-up
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, refer to the operating
manual of the Access Point.
To integrate the device into your system and to enable
control via the Homematic IP app, you must teach-in the
device to your Homematic IP Access Point first.
• Open the Homematic IP app on your smartphone.
• Select the menu item
“Teach-in device” (see
figure 3) .
• To remove the electronic unit (B) from the frame
(A) , take hold of the sides of the electronic unit
and pull it out (see figure 2) .
• Turn over the electronic unit.
• Remove the insulation strip from the battery
compartment of the device.
• Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(E) briefly (see figure 3) .
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.