35
Restore factory settings
1x long red
lighting
Operation
failed or duty
cycle limit is
reached
Please try again (or
see „7.2 Command
not confirmed“ on
page 32 or „7.3
Duty Cycle“ on
page 33).
6x long red
flashing
Device
defective
Please see your
app for error mes-
sage or contact
your retailer.
1x orange and
1x green lighting
(after inserting
batteries)
Test display
Once the test dis-
play has stopped,
you can continue
8
Restore factory settings
The factory settings of the device can be resto-
red. If you do this, you will lose all your settings.
To restore the factory settings of the water sensor please
proceed as follows:
• Press and hold down the system button
(A)
for 4
seconds, until the LED
(A)
will quickly start flas-
hing orange
(see figure 5)
.
