31
Start-up
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(A)
shortly (
see figure 5
).
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the device LED
(A)
lights up green. The device is now ready for use.
If the device LED lights up red, please try again.
• In the app, select in which applications you want
to use your device.
• Allocate the device to a room and give the device
a name.
5.2
Labelling field
With the labelling field
(F)
on the back side of the remote
control you can inscribe the functions of each button.
• To insert or exchange the labelling field, please
remove the cover.
• Insert the desired labelling field and replace the
cover.
