40
Restore factory settings
LED lights up red, please try again.
• Release the system button to finish the procedure.
The device will perform a restart and Access Point is
being reset.
7.2
Resetting and deleting the entire
installation
To reset the factory settings of the entire installation, the
procedure described above must be performed twice in
succession, within 5 minutes:
• Reset the Access Point as described above.
• Wait at least 10 seconds until the LED permanently
lights up blue.
• Immediately afterwards, perform the reset for the
second time by disconnecting the Access Point
from the power supply again and repeating the
previously described steps.
• After the second restart, your system will be reset.
After the second restart, your system will be reset.
