52
Restore factory settings
Short orange
lighting (after
green or red
confirmation)
Batteries empty
Replace the batte-
6x long red
flashing
Device defective
Please see your
app for error mes-
sage or contact
your retailer.
1x orange and 1
x green lighting
(after inserting
batteries)
Test display
Once the test dis-
play has stopped,
you can continue.
Long and short
orange flashing
(alternating)
Update of device software
(OTAU)
Wait until the up-
date is completed.
10
Restore factory settings
The factory settings of the device can be restored. If you do this, you
will lose all your settings.
To restore the factory settings of the device, please proceed as follows:
•
Open the battery compartment
(B)
by pulling the battery
compartment down
(see figure 3)
.
•
Remove a battery.
•
Re-insert the battery making sure that it is right way around while
pressing the system button
(D)
at the same time. Press and hold
down the system button until the device LED
(D)
starts to flash
quickly orange.
•
Release the system button briefly and then press and hold the
system button again until the orange flashing changes to a green
lighting.
•
Release the system button to finish the procedure.
The device will perform a restart.
Summary of Contents for HMIP-eTRV-2
