39
Restore factory settings
1x orange
and 1 x green
lighting
Test display
Once the test dis-
play has stopped,
you can continue.
9
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the alarm siren, please
proceed as follows:
• Rotate the device anti-clockwise in order to re-
move it from the mounting plate
(see figure 6)
.
• Remove one battery from the battery compart-
ment
(D)
.
• Please wait a minute.
• Insert the battery ensuring that the polarity is
correct
(see figure 7)
while pressing and holding
down the system button
(B)
for 4 seconds at the
same time, until the LED quickly starts flashing or-
ange
(see figure 5).
• Release the system button again.
• Press and hold down the system button again for
4 seconds, until the status LED lights up green.
• Release the system button to finish the proce-
dure.
Summary of Contents for HmIP-ASIR
