42
10.2 Command not confirmed
If a receiver does not confirm a command (at least
one when more than one have been taught), the
device LED is illuminated in red when the transmissi-
on is complete. The error will then be found with the
receiver:
•
Receiver not accessible
•
Receiver cannot execute command
(load failure, mechanical blockage, etc.)
•
Defective receiver
11 Maintenance and cleaning
The product is maintenance-free besides possibly
requiring a battery change. Maintenance or repairs are
only to be done by trained professionals. Clean the
product using a soft, clean, dry and lint-free cloth.
To remote heavier contamination, make the cloth
damp with lukewarm water. Cleaning agents that con-
tain solvents are not to be used because it can harm
the plastic housing and the labels.
