34
In order to reset the device, you must use the configuration
software of the center for resetting! The procedure is described
in the center software instructions.
9
Changing the label cards
First, open the battery compartment cover as described for
changing batteries. A red slider switch is located under the bat-
teries. Push the slider switch in direction 2.
Set the remote control down on the table in front of you with the
buttons facing up. Flip the button cover up and pull the cover out
of the device at an angle.
The lighting sheet can be accessed between the buttons now. A
diffuser sheet is already mounted on it and ensures even illumi-
nation and should therefore not be removed.
Numerous labels for various applications are provided on the
enclosed sheet. Choose the desired labels and separate them
carefully from the sheet using the perforations provided.
