24
Permitted cable cross sections for connecting
to AP actuators:
Rigid cable
[mm
2
]
Flexible cable
without ferrule
[mm
2
]
Flexible
cable with
ferrule
[mm
2
]
0.4 – 1.5
0.34 - 1.50
0.34 – 1.00
7 Start-up
7.1 Simple operator functions on the device
The device features one control button per channel.
You can operate the actuator by means of these
buttons immediately (no teaching-in required)
and check that the electrical installation has been
performed correctly.
Simply press and release the button to operate
the actuator. A long button press (longer than
four seconds) will switch the actuator to teach-
in mode.
