67
Step 1:
Remove rocker from rocker adapter.
Step 2:
Hold down the Config button (
B
) for at
least 4 seconds with a narrow, pointed
object (e.g. a ballpoint pen) until the
LED in button starts to flash slowly.
Now release the button again.
Step 3:
Press the button again for at least 4
seconds until the LED flashes rapidly,
then release the button again.
Step 4:
The device has now been reset to the
initial state.
Step 5:
Now replace the rocker on the rocker
adapter.
10 Device LED feedback
10.1 Flashing codes
Various actuator states are indicated by the channel
LED flashing:
Slow flashing
Teach-in mode
Fast flashing
Reset
