HomeMatic HM-LC-Dim1T-DR, Installation And Operating Manual

Page: 40 / 68

40
Hazard information
The device described is part of the building
installation. When planning and setting, the
standards and guidelines which are applicable
in the country in which the equipment is
installed must be complied with.
The device may only be used for fixed
installations. The device must be securely
attached within a fixed installation.
The device has been designed solely for
operation on a 230 V/50 Hz AC supply. Only
qualified electricians (to VDE 0100) are
permitted to carry out work on the 230 V mains.
Applicable accident prevention regulations must
be complied with whilst such work is being
carried out.
To avoid electric shocks from the device, please
disconnect the mains voltage (trip the miniature
circuit-breaker). Non-compliance with the
installation instructions can cause fire or
introduce other hazards (see sec. "5 Installa-
tion" on page 45).
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.