Homematic IP HmIP-DRSI4, Installation And Operating Manual

Page: 50 / 60

50
Start-up
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, refer to
the Homematic IP User Guide, available for
download in the download area of
www.homematic-ip.com.
To integrate the device into your system and to enable
control via the free Homematic IP app, you must teach-in
the device to your Homematic IP Access Point first.
To teach-in the device, please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device” .
• After power supply is established, the teach-in
mode will be active for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(A)
briefly (see figure 9) .
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.