Homematic IP HmIP-DLD, Mounting Instruction And Operating Manual, Page: 47 / 64

47
Start-up
To integrate the device into your system and to enable
control via the Homematic IP app, you must teach-in the
device to your Homematic IP Access Point first.
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device” (see fig-
ure 4) .
• Remove the battery compartment cover (E) on
the right side of the device ( see figure 5 ) by pull-
ing the cover off using the notches at the bottom
of the device.
• Remove the insulation strip from the battery
compartment of the device.
• Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(C)
shortly (see figure 6) .
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
See the sticker supplied or attached to the battery
compartment of the device.