Page 10
ASSEMBLY
ATTACHING THE FRONT HANDLE
See Figure .
Loosen and remove the wing nut, washer, and bolt from
the handle.
Install the handle on the drive shaft housing at the loca-
tion indicated by the label on the shaft.
Adjust handle up or down, if necessary, to desired operat-
ing position.
Reinstall the bolt, washer, and wing nut. Tighten wing nut
to secure.
ATTACHING THE GRASS DEFLECTOR
See Figure .
WARNING:
The line cutting blade on the grass deflector is sharp.
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
Remove the bolt, washer, and wing nut from grass
deflector.
Press the grass deflector onto the bottom of the curved
shaft as shown.
Insert the bolt through the grass deflector and the bracket
on the curved shaft.
Place the washer on the bolt.
Place the wing nut on the bolt and tighten securely.
wING
NUT
FRONT HANDLE
BOLT
Fig. 4
Fig. 5
GRASS
DEFLECTOR
wING NUT
wASHER
BRACkET
wASHER
BOLT