manualshive.com logo in svg

Homelite CSP3816, Operator'S Manual

Share
Download
Homelite CSP3816 Operator'S Manual Download Page 9

UK

 - Page 9

Weight - No bar, chain, fuel or oil ...............................................................................................................  4.4 kg (9.7 lbs.)

Fuel tank capacity ..................................................................................................................................  575 cm

3 

(19.4 oz.)

Oil tank capacity ...................................................................................................................................... 350 cm

3 

(11.8 oz.)

Bar lengths .......................................................................................................................................... 40-50 cm (16-20 in.)

Chain pitch ........................................................................................................................................... 8.26 mm (0.325 in.)

Chain gauge .......................................................................................................................................... 1.27 mm (0.050 in.)

Chain type ............................................................................................................................................. Semi-Chisel, LoPro

Drive sprocket ........................................................................................................................................................ 7 - tooth

Engine displacement........................................ ................... ............................................................ 45 cm

3 

(2.75 cu.in.)

Maximum engine power ISO 7293)..................... ...................................................................................... 1.9 kW (2.5 HP)

Maximum engine speed with attachment .......................................................................................................... 12,500 min

-1

Idle engine speed .................................................................................................................................... 2,600 - 3,400 min

-1

SPECIFICATIONS

Summary of Contents for CSP3816









































Reviews:

No comments

Brands by name

Popular brands

Load more brands