2)
Tilt the appliance backwards by no more than 45°. You may find
it easier to lay the appliance on its back, however you will need
to let the appliance stand for 8 hours before turning it on should
you do this.
3)
Remove the lower hinge by unscrewing the securing
screws.(remove the leg first )
4)
Pull the door downwards towards the bottom of the appliance,
releasing the top of the door from the top hinge-pin. Place the
door somewhere safe from damage.
5)
Unscrew the three screws on the top
hinge and remove it. Re-attach the
hinge to the opposite side of the
appliance.
6)
Remove the hinge-pin hole cap from
the top of the door and insert it into
the existing hinge-pin hole in the
opposite side, thus exposing the new
hinge-pin hole and covering the old
hole.
7)
Unscrew the hinge-pin receiver
from the bottom of the door and
relocate it to the opposite side.
There are pilot groves for the
screws on the opposite side.
16
pliance.
8)
Reposition the door back onto
the appliance, slotting the door
onto the hinge-pin protruding
from the top of the ap
