Cleaning the door
o
To clean the edge around the outside of
the door, you should use a soft, damp
cloth only.
o
To prevent water from penetrating the
door lock or electrical components, DO
NOT use a spray cleaner of any kind.
o
DO NOT use any abrasive cleaner or scouring pads on the inner
or outer surfaces, as they may cause damage to them.
Error code failure system
The following error codes can possibly be remedied by the customer
and the maintenance steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR MAINS
POWER SUPPLY.
CODE MEANING
POSSIBLE
CAUSES
E1
Door open
The door is open when the
dishwasher is operating
E2
Water inlet
Water inlet malfunction
E3
Water drainage
Water drainage malfunction
E4
Temperature sensor
Temperature sensor malfunction
E5 Overflow
/
leakage
Overflow / water leakage occurs
E6
Water leakage
Water leakage occurs
E7
Heating element
Abnormal heating
IF THE FAULT CODE REAPPEARS AFTER FOLLOWING
THE ADVICE ON THE FOLLOWING PAGES AND
CLEARING THE FAULT CODE YOU SHOULD TURN OFF
THE APPLIANCE. DISCONNECT THE APPLIANCE
FROM YOUR MAINS SUPPLY AND THEN ARRANGE
FOR AN ENGINEER TO ATTEND THE APPLIANCE. YOU SHOULD
CONTACT THE CUSTOMER CARE DEPARTMENT.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
26
