6
Fig. 2
How To Use
Power Button
Plug unit in to a 120 volt AC electrical outlet. Push the POWER ON/OFF ( ) button once to turn the
unit on. Push the POWER button a second time to turn all indicator LEDs off (unit will continue to
function). Push the POWER button a third time to turn the unit off.
ATTENTION:
When the water in the tank is almost empty, the humidifying function will power
off to indicate to the user to refill the tank.
Mist Increase and Decrease
There are 5 different levels of mist output from Lowest to Highest. To increase the mist output,
press the MIST INCREASE (
) button until the desired mist output is reached. The selected
mist level will correspond to the number of sections lit along the mist indicator light ring.
When the maximum mist output has been reached, the indicator ring light will blink once. To
decrease mist, press the MIST DECREASE ( ) button until the mist has decreased to the
output level desired. When the minimum mist output level has been reached, the indicator ring
light will blink once. (Fig.2)
Warm and Cool Mist Control
The humidifier is equipped with the option to select warm or cool mist. Each time the unit is
turned on it will start producing cool mist. The mist indicator light ring will glow with a blue light.
To select Warm Mist, press the WARM/COOL MIST button. When warm mist is selected, the
mist indicator light ring will change from blue to red and warm mist will start being produced.
To return to cool mist, press the WARM/COOL MIST button again. The mist indicator ring will
change from red to blue. (Fig.2)
NOTE:
Once warm mist is selected, it will take 15 minutes to heat up before the mist
becomes warm.
HEAT
COOL
Oscillating
ON/OFF Button
Mist Indicator
Light Ring
Mist Decrease
Button
Mist Increase
Button
Power ON/OFF
Button
Warm/Cool Mist
Button
