Clear+ controls
The device is built with several user friendly features for a safe and easy experience.
Sensors
Contact sensor
The clarifying blue light, sonic vibration and gentle warming will only
activate when the treatment head is in direct contact with the skin.
Temperature sensor
The device treatment head has a built-in sensor that will turn the
device off if the treatment head surface gets too warm. Allow the
device to cool for 5-10 minutes before restarting.
Light indicators
Flashing green
The device is ready or delivering a treatment
Steady orange
The battery is being charged
Steady red
An error has occurred. It may be:
•
A problem with the installation of the treatment head
•
The battery is low on power
•
The unit may be overheating
Off
The device is off
Sound indicators
One beep
Start of treatment
One quick beep every
30 seconds
A treatment is underway and it has been 30 seconds since the last
beep or the beginning of the treatment
Two beeps
End of treatment cycle
or
low battery
Three beeps
High temperature on treatment head surface
Four beeps
Treatment head has been disconnected
Quick reference guide
IB-TandaClearQSEN-1011-01
10740 R00