6
G
B
INSTRUCTIONS FOR USE:
Massage Function
NOTE: The first press of the power button turns the unit on; the second press turns on the heat function with
massage and the third press turns the unit off.
1. Plug the appliance into a 220-240V mains outlet.
2. To activate the massage action, press power button once (Figure 1).
3. To activate soothing heat with the massage, press the power button a second time.
Massage heads will glow red (Figure 2). Allow a few moments for the heating action
to warm up.
4. When finished press the power button again to turn off the massage and heat function and unplug
the pillow.
NOTE:
• The Shiatsu Cushion is designed for use on the neck, back and shoulders
(see Figures 3 and 4).
• There is a 20 minute auto shut-off on this appliance for your safety. This feature should not
be considered as a substitute for ‘OFF’. Always remember to switch the appliance off when not in use.
• For the neck and shoulders it may work better to use the massager upside down
(as shown in Figure 5).
• The elasticated Velcro strap (situated on the rear of the massager) can be used to secure the massager to
the chair back (see figure 6).
CAUTION:
To avoid pinching do not lean on Shiatsu back massage mechanism in the cushion when adjusting your
body position.
Do not jam or force any part of your body in the moving massage mechanism.
(Figure 2)
(Figure 3)
(Figure 1)
(Figure 5)
(Figure 4)
(Figure 6)
IB-SP10HS-0911-02_Layout 1 09/09/2011 12:37 Page 6
All manuals and user guides at all-guides.com
all-guides.com
