6
Assembly and Instructions for Use
1. Unpack the product and check to make sure everything is included (Fig. 1).
2. This unit is powered by a DC adaptor.
3. The battery power is designed only to provide MEMORY BACK-UP for the clock
and alarm settings. One CR2032 battery (included) is inserted into the battery
compartment if memory back-up is desired (in the event of power outages or if
the unit is unplugged). The memory back up will keep track of the time and as
soon as the power supply returns, the display will indicate the correct time, and
the functions will become available again.
4. Attach the adaptor into the DC jack on the base of the unit (Fig. 3) and insert
the cord into a 120V household outlet.
Setting Time
SETTING THE CLOCK
(Fig. 3):
1. Slide the Time Zone switch to the correct zone. (P=Pacific/M=Mountain/
C=Central/E=Eastern)
2. Slide the 12/24 switch to the desired setting (24 indicates Military time).
3. Slide the DST switch to either ON or OFF to set your clock to automatically
adjust for the Daylight Savings Time (DST).
To set the DATE/TIME
(Fig 1):
Press and hold the DATE/TIME SET button.
1. The year will flash. Use the +/- buttons to set year.
2. When year is set, press DATE/TIME SET button. Month and day will flash. Press
the +/- buttons to set month. When month is set, press the DATE/TIME SET and
use the +/- buttons to set day.
3. When month and day are set, press DATE/TIME SET. Hour will flash. Use the +/-
buttons to set hour. NOTE: AM/PM choice will be made at this time.
4. When hour is set, press the DATE/TIME SET button. Minutes will flash. Use the +/-
buttons to set minutes. Minutes will flash for 10 seconds and then stop. Your clock
is set.
E
