Jet
Spa Elite
Luxury Bath Spa
TM
6
On/Off
To turn on the
JetSpa press the
POWER button.
DO NOT REACH FOR POWER SUPPLY WHILE IN TUB. DO NOT
DISCONNECT POWER UNTIL POWER IS TURNED OFF. IF UNIT
HAS BEEN IMMERSED FOR MORE THAN 5 MINUTES, REMOVE
UNIT FROM THE TUB, PRESS THE “OFF” BUTTON, DISCONNECT
POWER CORD FROM ALCI POWER PACK, DRAIN WATER FROM
UNIT AND STORE IN A DRY PLACE FOR AT LEAST 24 HOURS
BEFORE NEXT USE.
Maintenance
Keep this unit clean and clear of obstructions. Check the outflow con-
trol frequently for potential obstructions, including lint and hair, that
could block air or water flow. We recommend cleaning this unit after
each use with mild detergent or soap.
1. Unplug the unit and allow it to cool before cleaning. Clean only
with a soft, slightly damp sponge. Note: Do not use abrasive clean-
ers, brushes, gasoline, kerosene, glass/furniture polish or
paint thinner to clean.
2. This unit should also be disinfected periodically to keep it bacteria
free. Follow a disinfecting schedule of once per week if the unit is
used frequently, (3 or more times / week). Disinfect after each use
when this unit is used only occasionally.
Do not attempt to repair this unit. There are no
user serviceable parts. For service, send the unit
to the HoMedics’ address listed in the warranty
section.
Suction Cups
Keep JetSpa
securely mounted.
Adustable Jets
Jets adjust in
several directions
to direct powerful comfort
where you need it most.
Fill Line
Fill the bathtub with water
to this line.
Variable Control
Customize your relief
from powerful jet stream
to gentle bubbles.
fill
lin
e
Jet-2 SP/ENG 7/17/02 10:42 AM Page 7
