5
G
B
INSTRUCTIONS FOR USE
Massage Function
NOTE: Always ensure the appliance is set to the ‘OFF’ before inserting the plug into a mains outlet.
1. Connect the power cable to the product by inserting the connector into the socket attached to the
product. Plug the appliance into a 230V mains outlet and turn the power swtich clockwise and you will
hear a click.
2. Your massager comes equipped with 4 attachments (Figure 1). Attach the different heads by clipping on
and off (Figure 2).
3. To activate the massager, turn the the power switch clockwise and you will hear a click. Adjust the massage
intensity by rotating the dial on the front of massager - clockwise for more intensity, anticlockwise for less
intensity (Figure 3).
4. Apply the massager head lightly to the area you wish to treat. Move the unit slowly, holding it over the
targeted area. Treat the area for a short period of time and move to another area. NEVER treat the same
area for longer than 3 minutes.
5. To turn the unit off, turn the power switch anticlockwise until you hear the click. For your safety the device
will automatically turn off after 15 minutes of continuous use.
Tips for Use
Massage in a firm circular motion, concentrating on targeted problem areas of the body.
This unit should never be used without the Soft Mesh Cover (Attachment 4).
Fig. 2
Fig. 3
IB-HHP355-0614-03_Layout 1 19/06/2014 17:36 Page 5
