HoMedics GARANTIEDE2ANS, Instructions For Use Manual

Page: 12 / 16

12
GB
12
1. Ensure that the unit is unplugged before filling with water. Fill with warm
water to the MAX fill line located on the inside of the tub.
NOTE: The water heater will only help to maintain the temperature between
40-45 degrees. It will not heat cold water. For a warm water massage, fill the
unit with warm water.
2. Place the unit on the floor in front of a chair. It is recommended to place the
product on a towel.
3. Plug the unit into a 220-240 AC power supply.
4. Sit down and place your feet in the spa.
5. To operate the unit:
to activate vibration massage, press
to activate Bubble M Keep Warm, press
Vibration and Bubble massage settings can be used separately or at the same
time.
N.B.
The keep warm function is automatically activated when the
bubbles are switched on. The vibration massage can be used with or without
water. The bubble m keep warm must only be used with water.
6. To activate the water heater press the indicator light will show. The
water heater will heat the water to maintain the temperature between 40-
45°C. To deactivate the water heater press the button again.
N.B. When filling the footspa use warm water, the heater is not designed
to heat the water from cold. Perception of temperature is individual: If the
water feels uncomfortably hot, turn off the heater and allow to cool.
7. Enjoy a deep massage by sliding feet back and forth over the stimulating
nodes and rollers on the footspa floor. The fixing bracket from one side will
come away with the roller, take care not to lose this. To reassemble: 1. Insert
the free end of the roller into the fixed bracket. 2 Carefully clip the other end,
with the bracket attached, back into place.
8. Move your foot over the exfoliating pumice stone to smooth the skin. To
change between the coarse and fine stone simple lift the attachment and
replace.
9. To turn off, press the buttons again to deactivate.
10. To empty: First, unplug the unit. Tip the unit, allowing water to pour out
along the drain spout (see fig.3). DO NOT pour water over the control panel.
PRODUCT FEATURES
PRODUCT FEATURES
Splash guard
Max. fill line
Fig. 1
Fig. 2 Fig. 3 Fig. 4
Bubble Spa:
Enjoy a soothing and
rejuvenating bubble
massager
Massage rollers x4:
Roll beneath your feet for a
deep penetrating foot massage
Spacious design:
Comfortably fits up
to size 12/47 foot
Water heater: Heats water to maintain
temperature between 40-45°C
Vibration Massage: Enjoy an invigorating
massage to boost circulation. This feature can
be used with or without water.
Ergonomically angled base for superior comfort
2 x interchangeable pumice stones.
Coarse: for exfoliation. Smooth: for polishing
skin. Pouring spout for easy water disposal
Acu-nodes: stimulate the
acupressure points on the
sole of the foot.
Touch controls
x2
Magnetic therapy:
With 1000 gauss rating
Exfoliating pumice
stones see Fig 4.
INSTRUCTIONS FOR USE
Downloaded from www.vandenborre.be